How to Disassemble Bose Nc700 Headphones​

Bose NC700 headphones are known for their innovative noise-cancellation technology, premium sound quality, and sleek design – but like any piece of technology, they may require maintenance, repair or cleaning over time. Disassembling them may help identify issues such as wiring malfunction, speaker damage or worn batteries and help troubleshoot issues quickly.

With this guide, we will walk you step-by-step through the disassembling of Bose NC700 headphones safely and successfully.

Why Would You Need to Disassemble Bose NC700 Headphones?

Before beginning disassembly, it’s essential to comprehend why someone would wish to disassemble their headphones. Common reasons include:

Replacement of Worn-Out Parts: Over time, parts such as the ear cushions, headband, or battery may become worn out and require replacement.

Fixing audio issues: Are your Bose NC700 headphones experiencing audio cutouts or uneven sound quality? A quick internal inspection could provide the solution.

Cleaning Your Headphones: Dust and debris may accumulate within headphones over time, diminishing sound quality. To maintain their peak condition and sound output.

Troubleshooting connectivity issues: If Bluetooth or noise cancellation capabilities are malfunctioning, internal repairs may be required to rectify.

Disassembling high-end headphones requires meticulous care to prevent damage to sensitive components.

Disassembling Bose NC700 Headphones Requires Special Tools

Before beginning any task, ensure you have all of the appropriate equipment on hand:

1. Phillips-head screwdriver for small jobs
2. Plastic pry tool and Tweezers (for handling small components).
3. Soft cloth should be used to protect surfaces.
4. Adhesive tape (for temporarily securing small components if required).

Note of Caution:

Note that disassembling Bose NC700 headphones could void their warranty; for best results and professional repair or replacement services contact Bose directly instead.

Step-by-Step Guide on Disassembling Bose NC700 Headphones

Step 1: Remove Ear Cushions.

• At first, when disassembling Bose NC700 headphones, start by removing their ear cushions – they’re made to be easily replaceable, making this step one of the easiest ones!
• Carefully pull back on the ear cushion until it detaches from its frame with just a gentle tug.
• Whenever there is resistance, use a plastic pry tool to lift one edge of the ear cushion carefully to not damage leather or fabric surfaces.

Step 2: Unwrap the Outer Plastic Cover

• Once the ear cushions have been taken apart, you must access their internal components by taking steps such as unzipping and unwrapping their plastic cover to gain access to the speaker and wiring components.
• Use a plastic pry tool to lift the edges of the plastic housing.
• Start at one corner and move circumferently around.
• Be careful as the clips used to secure the cover to the earcups may be fragile and need to be handled delicately.
• Once the cover has been taken off, you’ll gain access to all of the internal wiring and speaker components.

Step 3: Detach Speaker Assembly

• Once the outer casing is off, the speaker assembly needs to be uninstalled with greater care as its wiring may require special consideration.
• Use a small Phillips head screwdriver to unscrew and unlatch any of the speaker screws securing them to their place.
• Gently lift out your speaker from its base while being mindful to take note of any wires attached to it.
• If it becomes necessary to disconnect wiring, use tweezers to gently unplug connectors with care, making note of their orientation for later reassembly.

Step 4: Access Your Headband

• If you need to gain access to or replace components within a headband (including noise-cancelling microphones ), follow these steps:
• Locate the two screws located at either end of your headband.
• Use the Phillips screwdriver to safely loosen and separate both halves of the headband.
• Should additional wiring or padding need to be removed carefully?

Step 5: Unplug or disconnect the battery (optional).

• Your Bose NC700 headphones may require replacing their battery every so often; its location lies inside one of their earcups. In these instances, replace only that part that houses it – the battery.
• Locate the battery near the base of the earcup once you have removed the speaker assembly.
• Unscrew any fasteners holding it together.
• Use tweezers or your fingertips to carefully lift out and disconnect the battery from its wiring system.

Step 6: Reassemble Your Bose NC700 Headphones

• Once your repairs are complete, it’s time to reassemble your headphones. Take these steps in reverse:
• Reconnect any detached wiring while paying careful attention to its original layout.
• Secure the speaker assembly using screws.
• Snap the outer plastic cover back onto the earcup.
• Press firmly until the ear cushions snap back into their proper places.
• Once reassembled, test out your headphones to ensure optimal functionality.

Conclusion

Being able to disassemble Bose NC700 headphones can be an incredibly useful skill when performing maintenance troubleshooting issues with them, or replacing worn-out parts. Following our step-by-step guide will ensure a seamless disassembly process, but please use caution and consult professional assistance if unsure about any steps as disassembling high-end headphones can be delicate work.

By following the techniques outlined in this article, you’ll be better equipped to tackle repairs or modifications on your headphones. Remember, patience and precision are keys for successfully disassembling and reassembling Bose NC700 headphones without incurring damage to them.

---

Related more – World Facts Now:
How to Pair Beats Headphones Step-by-Step Guide for Mac, Windows, Android and iOs Users